|
|
|
|
 |
PN-1
The PN-1, the heart of the PN102/LA performance and
the muscle behind it, is a new kind of intelligent electronics system. It combines Class A/B amplification with comprehensive signal processing into a single lightweight unit. Protection, crossovers and parametric EQ are integrated into the signal path. |
 |
| PN-1R |
|
 |
The RHAON Empowered PN-1R adds onboard DSP and CobraNet capabilities. It has dual analog inputs, dual CobraNet inputs and an AES3id serial input. The onboard DSP is easily configured using RHAON software;
it includes eight bands of parametric EQ, high and low shelving filters, input level control and up to 20 msec of delay. Critical operating parameters such as signal clipping, amplifier output voltage and current, and temperature are continually monitored with automatic alert functions |
| Technical Specifications: PN-1 |
POWER RATING:
|
300 Watts RMS @ 8 Ohms |
| FREQUENCY RESPONSE: |
+0.0, -.5 dB, 20 Hz to 20 kHz |
| THD DISTORTION: |
< 0.02% typical |
| HUM & NOISE: |
<100 dB (A weighted) |
| DAMPING: |
<100 |
| INPUT: |
10 KOhm balanced differentialV for RPO |
| SENSITIVITY: |
1.o V for RPO |
| CMR: |
74 dB |
| CONTROLS: |
Gain (screwdriver adjustable) |
| POWER REQUIREMENTS: |
90-136 VAC or 180-260 VAC, 50/60 Hz
4 Amps @ 120 V, 2 Amps @ 240 V
Idle Current: 300 mA@120V; 150@240V
Max Inrush Current: 10 Amps |
| CONNECTORS |
|
| INPUT: |
Looping XLR; Female In, Male Out (pin1 chassis, pin2+, pin 3 -) |
| POWER: |
EC Power Connector |
| Technical Specifications: PN-1R |
| The PN-1R amplifier is identical to the PN-1 except for the addition of the RHAON Network Interface; additional capabilities include: |
| INPUTS: |
CobraNet; dual RJ45 connectors;accept
CAT 5 copper cable.
AES/EBU; Phoenix connectors
Analog; Phoenix connectors |
| DIGITAL FORMAT: |
16 or 24 bit PCM; 48 or 96 kHz sample rate; selectable Network Latency. |
| HUM & NOISE: |
<100 dB (A weighted) |
| PROTECTION: |
Soft & Peak Limiting, Excursion Control & Thermal Regulation |
|
| |
